Manual Cylindrical Grinders |
|
|
|
The manual series plain cylindrical grinders are the largest of ECOTECH'S Grinders designed for large rolls and shaft type work. These high precision grinders have been very reliable for the paper and steel industry and the manufacturing of their exotic rolls.
These grinders have dead centers which provide higher repeatability accuracies. The workhead has a step pulley drive system providing 6 variable speeds. They also have a pick feed that can be set to feed on either end of the traverse or at both ends, and has a variable feed adjustment. The wheelhead must be manually retracted by actuating the feed handle.
All of ECOTECH'S Plain Cylindrical Grinders have a heavy aged cast iron construction, that has been precision machined and hand scraped. The manual series has a Hydro-dynamic spindle, and a Hydro-static lubrication system on the table and wheelhead ways. With these special features your grinders will give you many years of trouble free operation and high accuracies.
|
| Series |
Max O.D. |
Lengths Between Center |
Max Workload |
Wheel Size(DxWxID) |
Wheelhead Hp. |
Machine Weight |
| M1320 |
8.00 |
20.0 – 30.0 |
400 lbs |
16x2x8 inch |
7.5 hp |
7,059 lbs |
| M1332 |
12.00 |
20.0 – 120.0 |
400 lbs |
24x3x12 inch |
15 hp |
8,820 lbs |
| M1350 |
20.00 |
40.0 – 315.0 |
2,205 lbs |
30x3x12 inch |
20 hp |
24,255 lbs |
| M1363 |
25.00 |
80.0 – 160.0 |
6,608 lbs |
30x3x12 inch |
15 hp |
52,255 lbs |
| M1380 |
32.00 |
120.0 – 197.0 |
6,608 lbs |
30x3x12 inch |
20 hp |
41,413 lbs |
|
.jpg)
